A user reported about the Netgear router that keeps on rebooting itself. The router is a little old and its setup is done after the Netgear Genie app. Older Netgear routers use the Netgear Genie app. The latest ones use the Nighthawk app. The router keeps on restarting after every two to three hours. If you have similar concerns with your router and are looking for a solution then trust the troubleshooting tips given in this article.
How to Fix Netgear Router That Keeps on Rebooting?
Verify the Power Supply
One of the major reasons why your router reboots itself continuously is the poor power supply to it. For a router to work optimally it must be connected to a well working power outlet and should be receiving a consistent power supply. Examine the power outlet in use. Also, ensure that the power adapter is not loose.
Try using an alternative power outlet to make sure that the power supply to the Nighthawk router is non fluctuating.
You can use a UPS (uninterrupted power supply) if there are power outage issues in your area.
Use the Correct Power Adapter
Most of the Netgear routers have a detachable power cord or power adapter. You must use the one that came in the package. Using some other power adapter may be the reason for the poor power supply to the router. We recommend you fetch the power adapter that is meant for the Netgear Nighthawk router now and connect to it. Plug it in the power socket and then see if the issue gets resolved or not.
Perform a Firmware Update
An older firmware version on the router can also be responsible for the router that keeps rebooting. Consider updating the firmware now. Netgear keeps on releasing firmware updates from time to time. You simply need to get your router updated to the most recent firmware version. You can update the router manually by first downloading the latest firmware file on your PC and then installing it on the router by logging in using 192.168.1.1.
As soon as the firmware gets updated, the router won’t reboot itself again and again. In case you can not update your router or if the issue persists even after getting the firmware updated, try the next hack in line.
Reset the Router
Consider this as the final hack when you are exhausted by trying every other possible hack to get rid of the issue. You now need to reset your Nighthawk router and restore the factory settings on it. Resetting wipes out the customized settings from the router and make it as good as a new router. To reset your router, first, remove the Ethernet cable that joins it to the modem. After that, ensure that the router is properly turned on. Next, look for a button on the router labeled Reset or Factory Reset. Press it gently for about 10 seconds. The router will be reset and the default settings will be restored on it.
Set Up Netgear Nighthawk Router
Since the router runs on the default values, you should set it up from scratch. We have highlighted the steps for the WPS setup method below. However, you can choose the manual method or the Netgear Genie download app on your desktop or mobile to get the setup done.
Here are the instructions for Netgear router setup via the WPS button:
- Place the router closer to the modem.
- Switch on the modem.
- Next, switch on the router.
- Find the WPS button on the router and push it.
- Thereafter, press the WPS button on the router within two minutes of pressing the button on the router.
- Your Netgear router is now set up using the WPS button.
Conclusion
Once you have set up your router after resetting it, it would no longer reboot again and again. We recommend you keep its firmware updated to the latest version all the time. Also, reboot it often to give it some rest and get rid of technical glitches. These simple and quick tips will help you get the most out of your Netgear router.
